Builder Gel Reney Cosmetics Builder Gel
- Characteristics
- 描述
- 使用方法
-
年龄:
18+
大小: 35 g
分类: Professional
品牌国家: Poland
生产国: Poland
Create the perfect manicure or experiment with length while extending with Reney Cosmetics Modeling Gel. A beauty product with a comfortable consistency is evenly distributed over the nail plates, preparing them for coating and design. The product is efficiently polymerized in UV and LED lamps without bubbles and streaks, thanks to which the nails acquire an even surface and a bright natural shine.
Benefits of Reney Cosmetics Builder Gel:
- has a universal shade;
- prevents cracking of the coating;
- self-aligns on the nail plates;
- quickly polymerizes within 2 minutes in a UV lamp and 60 seconds in an LED lamp;
- flexible and easy to apply;
- does not turn yellow for a long time;
- does not form chips, bubbles or streaks;
- does not spread onto the cuticle;
- does not cause a burning feeling during drying;
- has a balanced consistency of medium density;
- can be easily removed with nail polish remover;
- suitable for building and strengthening nails.-
1. Degrease the nail surface. Move aside the cuticle, remove the shine from the nail plate with 180/240 grit milky. Remove dust. Apply Nail Dehydrator.
2. Apply an acidic Acid Primer or an acid-free Bond Control primer of your choice, depending on the condition of the nail plate. Use an acidic primer when the nail plate is very wet; an acid-free primer is suitable for normal nail. The Acid Primer should be applied with a semi-dry brush in a small amount, without touching the skin. The product evaporates from the plate on its own.
3. As a base, use a UV/LED Builder Gel. Apply in a thin layer with rubbing movements. Cure in LED lamp for 30-60 sec.
4. Install the template one by one on each finger and lay out a thin substrate of the desired length and shape, simulate the architecture of the nails with a gel of the selected shade. Then we send it to the lamp for complete polymerization of the gel for 60 seconds. *
5. Remove residual stickiness with Gel Cleanser.
6. Carry out a phased sawing with a file 180/240 grit.
7. Apply a topcoat to give shine and protect against chips and scratches, curing for 60 seconds.